Lab 1. EIGRP Dasar

Lab 1. EIGRP Dasar

Konfigurasikan ip address dan routing EIGRP seperti dibawah ini:

 

-R1

Router(config)#int e0/0

Router(config-if)#ip address 12.12.12.1 255.255.255.0

Router(config-if)#no shutdown

Router(config)#int loopback 0

Router(config-if)#ip address 1.1.1.1 255.255.255.255

Router(config-if)#no shutdown

Router(config)#router eigrp 10

Router(config-router)#no auto-summary

Router(config-router)#network 1.1.1.1

Router(config-router)#network 12.12.12.0

 

-R2

Router(config)#int e0/1

Router(config-if)#ip address 12.12.12.2 255.255.255.0

Router(config-if)#no shutdown

Router(config)#int e0/0

Router(config-if)#ip address 23.23.23.1 255.255.255.0

Router(config-if)#no shutdown

Router(config)#int loopback 0

Router(config-if)#ip address 2.2.2.2 255.255.255.255

Router(config-if)#no shutdown

Router(config)#router eigrp 10

Router(config-router)#no auto-summary

Router(config-router)#network 2.2.2.2

Router(config-router)#network 12.12.12.0

 

-R3

Router(config)#int e0/0

Router(config-if)#ip address 23.23.23.2 255.255.255.0

Router(config-if)#no shutdown

Router(config)#int loopback 0

Router(config-if)#ip address 3.3.3.3 255.255.255.255

Router(config-if)#no shutdown

Router(config)#router eigrp 10

Router(config-router)#no auto-summary

Router(config-router)#network 3.3.3.3

Router(config-router)#network 23.23.23.0

 

Selanjutnya kita akan cek table routing pada router 1, dan pastikan router 1 bisa ping ke router 2 dan router 3.

 

-R1

1.0.0.0/32 is subnetted, 1 subnets

C        1.1.1.1 is directly connected, Loopback0

      2.0.0.0/32 is subnetted, 1 subnets

D        2.2.2.2 [90/409600] via 12.12.12.2, 00:12:29, Ethernet0/0

      3.0.0.0/32 is subnetted, 1 subnets

D        3.3.3.3 [90/435200] via 12.12.12.2, 00:09:27, Ethernet0/0

      12.0.0.0/8 is variably subnetted, 2 subnets, 2 masks

C        12.12.12.0/24 is directly connected, Ethernet0/0

 

 

Router(config)#do ping 2.2.2.2

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms

 

Router(config)#do ping 3.3.3.3

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 3.3.3.3, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/2 ms

 

Maka sudah berhasil!